Jinan Acetate Chemical Co.,Ltd

Сообщений 1 страница 3 из 3

Поделиться12023-07-07 03:33:49

Автор: Дмитрий.
Администратор

Jinan Acetate Chemical Co.,Ltd

Hot Melt ADHESIVE Adhesive
Filter Bond 7991 is developed for bonding the cigarette filter stick,with very good heat stability and
strong adhesion, suited for standard Hauni KDF and Molins PM equipment.
It conforms to composition requirements of FDA indirect Food Additives regulation 21 CFR 175.105
"Adhesives"
Technology Data
Appearance White
Solids 100%
Viscosity (BF DV-Ⅱ 27#20rpm160℃） 4000-5500cps
softening point 105 - 120℃(Ring & Ball)

Application
Suggested for all standard roller or nozzle applicators. Operating Temperature: 130є C to 180є C,
depending on the conditions of machines, substrates, and environment etc.
Storage
Store in a dry place where the temperature is below 40є C and the storage life is two year.
Precautions
• Do not mix with other adhesives.
• Container with adhesive must be sealed in order not contaminating.
• Material is applied hot. Appropriate clothing and eye protection should be used.
• Rotate stock - first in, first out.
Standard Package
• 25 kg/bag

CigaBond 7119-1
Hot Melt ADHESIVE Adhesive
Cigabond 7119-1 is developed For bonding the cigarette filter stick.CB7119-1 shows a very slightly
color and little smell, it has a very good heat stability in melt provided the recommended working
temperature is exactly kept. It has an excellent hot tack as well as very shot setting time.
It conforms to composition requirements of FDA indirect Food Additives regulation 21 CFR 175.105
"Adhesives".
Technology Data
Appearance White
Solids 100%
Viscosity (BF DV-Ⅱ 27#50rpm160℃） 1700±170cps
softening point 105 - 120℃(Ring & Ball)

CigaBond 5725
Product Type:
Water Based Emulsion
Technical Properties:
Appearance White emulsion
Solid 48-52%
Viscosity(BF DV-Ⅱ 4#/20rpm/25℃) 5,500~6,200cps
Gravity Approx 1.0
pH 4.0~6.5
Application:
Tipping glue for Cigarette manufacturing and fit for fine cigarette manufacture,
Suitble for high speed machine up to 14,000 Pieces / minute..
All raw materials fulfill the requirments of US FDA Indirect Food Additives Regulation21 CFR 175.105 “Adhesives”
Operational Suggestion:
Ready for use, stir throughly before using.
Direct transfer from glue wheel or rotary stencil
Safety: Please refer to MSDS document
Storage: Store in a dry place where the temperature is over 6є C and
The storage life is six months.
Precautions:
Do not mix with other adhesives.
Store in closed containers to prevent drying out and contamination.
Rotate stock: first in, first out.
Package:
20kg/pail

CigaBond 500P
Product Type: Water Based Emulsion
Technical Properties:
Appearance White emulsion
Solid 49±2%
Viscosity(BF DV-Ⅱ 2#/20rpm/25℃) 450±90cps
Gravity Approx 1.05
PH 4.0~6.0
Application:
500P is an adhesive applied for cigarette packaging on high speed machine,And isn’t easy to plug up the nozzle, Suited on Hauni, Molins HLP5,
SASIB etc.
Especial for HHS spray system.
All raw materials fulfill the requirments of US FDA Indirect Food AdditivesRegulation 21 CFR 175.105 “Adhesives”Operational Suggestion:
Ready for use, stir throughly before using.
Direct transfer from glue wheel or rotary stencil
Safety: Please refer to MSDS document
Storage: Store in a dry place where the temperature is over 6є C andthe storage life is six months.
Precautions:
Do not mix with other adhesives.
Store in closed containers to prevent drying out and contamination. · Rotate stock: first in, first out.
Package: 20kg/pail
210kg/pail

CigaBond 506S
Product Type: Water Based Emulsion
Technical Properties:
Appearance White emulsion
Solid 52-55%
Viscosity(BF DV-Ⅱ 2#/50rpm/25℃) 150-250cps
Gravity Approx 1.00
PH Approx 5.0
Application:
5056S is a side seam glue on high speed machine, also can be appliedon hinge lip packaging. Suited on Hauni Protoes, Sigma, Molin MK,
GD121, etc. and as side seam glue, the highest speed can achieve to20,000rpm.
All raw materials fulfill the requirments of US FDA Indirect Food AdditivesRegulation 21 CFR 175.105 “Adhesives”Operational Suggestion:
Ready for use, stir throughly before using.
Direct transfer from glue wheel or rotary stencil
Safety: Please refer to MSDS document
Storage: Store in a dry place where the temperature is over 6є C andthe storage life is six months.
Precautions:
Do not mix with other adhesives.
Store in closed containers to prevent drying out and contamination. · Rotate stock: first in, first out.
Package: 20kg/pail

whatsapp ；+8615562691556；
wechat: 15562691556
W: http://www.acetatechemical.com
Jinan Acetate Chemical Co.,Ltd
ruiling@acetek.com.cn

Цитировать Сообщение 1

Поделиться22024-02-12 19:48:23

Автор: Дмитрий.
Администратор

We manufacture superior quality acetate tow,which is the key raw material used in making cigarette filters.

Acetate tow is of white appearance and shows its cross section "Y" shape under microscope.

Jinan Acetate is capable of producing tow items with a wide range of single denier from 1.7 to 9.0 and total denier from 15,000 to 40,000.

Our tow has been used in 120m/min to 600m/min single rod and 1,000 m/min double rod machines.

whatsapp ；+8615562691556；
wechat: 15562691556
W: http://www.acetatechemical.com
Jinan Acetate Chemical Co.,Ltd
ruiling@acetek.com.cn

Цитировать Сообщение 2

Поделиться32024-02-12 20:04:07

Автор: Дмитрий.
Администратор

What is the acetate Tow?
Acetate tow is additionally called cellulose acetate tow. It is made from acetate flakes or cleansed all-natural cellulose. All-natural cellulose responds with the acetic anhydride flakes to develop the powder. It is just one of the esters of cellulose. It is amongst the chemicals that are utilized in the cigarette market. These specialized solvents are acetate or acetic ester by-products. Ethyl acetate (ETAC) tow is made from Ethyl ethanoate. Ethyl acetate has a chemical formula C4H8O2. cellulose acetate, which is the acetic acid ester of cellulose.Diacetate (typically called acetate) is specified as cellulose acetate for which greater than 74% as well as less than 92% hydroxyl has actually been acetylated (level of esterification over 2.22 and also below Drapes gently as well as flexibly

These features emerge from the residential or commercial properties of acetate fiber. The residential or commercial properties of acetate fiber, compared to the residential properties of various other significant fibers. We can see that acetate fiber really feels all-natural and also mild on the skin since it is made from high pureness pulp. The fiber cross-section for each and every thread is arbitrary as well as multi-lobal, as well as has a reduced refractive index. These residential properties offer it the sophisticated gloss and also clear tinting that resemble silk. Acetate fiber likewise has a reduced Young's modulus than polyester or cotton, thus permitting it to curtain flexibly. On top of that, the modest degree of main dampness gain back (3% to 7%) and also multi-lobal cross-section produce a diffusion result with capillary activity. This subsequently provides the fiber a suitable level of water absorbency and also quick-drying efficiency. Contrasted to rayon and also various other fibers, acetate fiber additionally has better security for measurements as well as dimensions, along with solid pleating toughness, since it does not swell a lot in water.

Suitable water absorption and also quick-drying top qualities

Does not diminish quickly, so gives security for measurements and also dimensions

Solid pleating toughness (triacetate).

No fears of pilling.

Reasonably heat array for risk-free ironing.

Does not tarnish quickly, as well as spots are very easy to get rid of.

Really feels all-natural as well as is mild on the skin

Sophisticated gloss as well as chromogenic high quality

by integrating it with various other fibers that have enough toughness, such as polyester, it has actually ended up being feasible to make use of acetate fibers for functional applications. Polyester fiber has a varicolored look and also flexibility, so it can contribute to the structure of acetate fiber. The mix of both fibers can create weaved as well as woven material that really feels remarkable on the skin.

SPEEIFICATIOIN5

2.5Y/25000 2.5Y/30000 2.5Y/35000 2.7Y/35000 2.8Y/28000 2.8Y/35000 3.0Y/28000 3.0Y/29000 3.0Y/30000 3.0Y/32000 3.0Y/33000 3.0Y/35000 3.2Y/37000 3.3Y/35000 3.3Y/37000 3.5Y/34000 3.5Y/35000 4.0Y/35000 4.8Y/30000 5.0Y/25000 5.0Y/30000 5.8Y/16000 5.8Y/17000 6.0Y/28000 7.3Y/30000 8.0Y/28000

Acetate Tow 3.0Y28000 3.0Y29000 3.0Y30000 3.0Y32000 3.0Y33000 3.0Y35000

Celloluse acetate Tow is the significant basic material in generating filter poles of cigarette.

After a processing system of stretching, gathering, setting the form and afterwards being wrapped by tissue paper, finally the filter rod is made according to customers demands on spec.

The filter pole made use of for cigarettes can substantially decrease the harmful material such as tar as well as nicotine, meanwhile the preference and also fragrance of the exquisite bouquet of cigarette is well preserved.

Owing to it is tidy, no undesirable odor, has a constant chemical structure as well as an excellent purification results, it's incredibly popular by cigarette suppliers worldwide.

Functions

1. Materials: nature virgin wood pulp

2. For manufacturing cigarette filter pole which lower hazadouse things like tar and also nicotine

3. Packaging: 200kgs/carton, 300kgs/carton, 500kgs/carton

4. 1 × 20' load 11tons, 1x40HQ 24-25tons

Item:3.0Y28000 Result Technical Requirement Test Method
Tow Denier 28000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Item:3.0Y29000 Result Technical Requirement Test Method
Tow Denier 29000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Item:3.0Y30000 Result Technical Requirement Test Method
Tow Denier 30000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Item:3.0Y32000 Result Technical Requirement Test Method
Tow Denier 32000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Item:3.0Y35000 Result Technical Requirement Test Method
Tow Denier 35000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Item Result Technical Requirement Test Method
Tow Denier 35000 ±900 YC/T 26–2008
Variation Coefficiency, Total Denier ≤0.21 ≤0.6 YC/T 26–2008
Denier per Filament 3.0 ±0.22 YC/T 26–2008
Crimp Number/25mm 24 ±4 YC/T 26–2008
Breaking Strength N/Ktex 21.6 ≥18 YC/T 26–2008
Section Shape Y YC/T 26–2008
Moisture % 5.2 6.0±1.6 YC/T 26–2008
Oil Content % 1.1 0.7-1.5 YC/T 26–2008
Acetone Residual% 0.07 ≤0.3 YC/T 26–2008
Titanium Dioxide Content% 0.39 0.4±0.2 YC/T 26–2008

Acetate Tow.